Description
Technical specifications:
When filling and emptying the device, the power plug must be unplugged.
Do not operate this device with wet hands.
The water level cannot be lower than the water level indicated on the boiler!
Be sure to wait for 2 minutes before opening the water injection screw (there is a risk of burns).
When the water volume is insufficient, the device will not automatically shut down.
Do not open the device unattended. Attention:
The device may generate heat during use.
Using hot steam (about 100 degrees) can cause serious burns.
When the safety valve is triggered, it is located within the safety valve area due to equipment overpressure or improper operation.
Please be very careful when changing positions during operation, as the steam device and hoses may be very hot. T
he equipment can only operate with pure water and does not contain any additives or additives. If not filled with water, do not open the device.
Capacity: 3L
Work Time : 10 minutes
Power: 220-240 V/50 Hz, 1850-2200W
Temperature: 0- 500 ° C
Weight: 2.2kg
Usage:
Work Time : 10 minutes
Power: 220-240 V/50 Hz, 1850-2200W
Temperature: 0- 500 ° C
Weight: 2.2kg
1. Take down the plastic bolt for water replenishment
2. Pour 3 liters of water into the device
3. Tighten the plastic bolts for water replenishment again
4. Tighten the steam hose on the equipment and insert the other end into the container that needs steam heating
5. Insert the power plug into the power socket and socket separately
Attention:2. Pour 3 liters of water into the device
3. Tighten the plastic bolts for water replenishment again
4. Tighten the steam hose on the equipment and insert the other end into the container that needs steam heating
5. Insert the power plug into the power socket and socket separately
When filling and emptying the device, the power plug must be unplugged.
Do not operate this device with wet hands.
The water level cannot be lower than the water level indicated on the boiler!
Be sure to wait for 2 minutes before opening the water injection screw (there is a risk of burns).
When the water volume is insufficient, the device will not automatically shut down.
Do not open the device unattended. Attention:
The device may generate heat during use.
Using hot steam (about 100 degrees) can cause serious burns.
When the safety valve is triggered, it is located within the safety valve area due to equipment overpressure or improper operation.
Please be very careful when changing positions during operation, as the steam device and hoses may be very hot. T
he equipment can only operate with pure water and does not contain any additives or additives. If not filled with water, do not open the device.
